Xtralite and Vitral are now a part of VELUX Commercial, and we are delighted to welcome you to our new website. Here, you will find our complete portfolio of daylight solutions and services for industrial, commercial and public buildings.

How to avoid overheating in classrooms


By VELUX Commercial
Hessenwaldschule featuring VELUX Modular Skylights
Hessenwaldschule featuring VELUX Modular Skylights

There’s no doubt that the physical design of classrooms can have a positive or negative effect on children’s learning outcomes. One of the key factors identified by studies over the past several decades is the importance of consistent thermal comfort.

Researchers have been studying the optimal temperature range associated with better learning outcomes for several decades. They have found that as temperature and humidity increase, students report greater discomfort, and their performance deteriorates with decreasing attention spans.

High indoor classroom temperatures have also been associated with higher incidences of headaches and eye, ear, nose and throat irritation, while high humidity levels can breed moulds known to cause or exacerbate a range of health problems such as asthma.

In Europe, all countries have policies for minimum temperature in school classrooms, as set out in their legislation or standards. These minimum requirements vary from country to country, as well as by season, but range from 17°C to 20°C. Fewer European countries have standards for the maximum temperature in classrooms, but those that do range from 22°C to 29°C.

In the modernisation of older schools, as well as new built schools, the provision of good thermal conditions is a key consideration that can be achieved with the inclusion of energy-efficient technologies such as natural ventilation, solar shading and intelligent building design.

eBook: Building better schools: six ways to help our children learn

Ventilation

Natural ventilative cooling during the day can be readily achieved by opening windows and rooflights. However, few schools make use of night ventilation. This method uses cool night air to reduce the temperature of a building’s thermal mass (walls, floors, furniture, etc.), so that on the following day less cooling energy is needed within the building.

Unwillingness to cool buildings at night likely stems from security issues and the possibility of inclement weather occurring when no one is there to close windows and skylights. One solution would be the installation of windows and skylights that can be partially opened to allow the entry of cool air, while preventing the entry of intruders or rain.

Other solutions

In countries where temperatures regularly reach 30°C or higher in the summer months, natural ventilative cooling may not be sufficient to keep classroom temperatures at a comfortable level.

In such cases, additional cooling devices such as ceiling fans and air-conditioning units are advisable.

However, field studies do show that people in naturally ventilated buildings accept higher temperatures (de Dear and Brager, 1998)¹. This is because the body adapts to its surroundings this phenomenon is referred to as adaptive thermal comfort. For this to be effective, it is vital that people can freely adapt their clothing and are able to open windows at will. In this way, thermal comfort can be achieved without air conditioning in even warmer climates, using only natural ventilation, solar shading and intelligent building design.

Whichever way it is achieved, thermal comfort in classrooms is essential to children’s well-being and, ultimately, to successful learning outcomes. Just like the porridge in the classic children’s tale of Goldilocks and the Three Bears, the temperature needs to be not too hot, and not too cold, but just right.

Sources

  1. de Dear and Brager (1998). Developing an Adaptive Model of Thermal Comfort and Preference. ASHRAE Transactions

Related articles

Hessenwaldschule

Just like the bowls of porridge in the well-known fairytale of Goldilocks and the Three Bears, the temperature in classrooms should be neither too hot, nor too cold, but just right.

VELUX Modular Skylights provide Exeter College with daylight

Did you know that well-designed classrooms have a significant influence on academic performance? Studies have found that improved physical characteristics of classrooms can boost the learning outcomes of students.

Ecole Maternelle René Guest featuring VELUX Modular Skylights

One important function of the building envelope is to protect the interior from unwanted outdoor noise. Sound insulation is an important parameter of building components, as outdoor noise can have negative effects on health, mood and learning capabilities.

Rooflight solution with Longlight 5-30˚ modules, Hessenwaldschule, Weiterstadt, Frankfurt, Germany

Well-designed classrooms can help boost the academic performance of students. One of the deciding factors is a good acoustic environment. In this article, we look at what noise in classrooms really means, and how architects and designers can minimise its negative effects.

Children in classroom with lots of daylight - VELUX Commercial

Giving young school children a sense of ownership of "their" classroom promotes a sense of self-worth and responsibility and has also been shown to improve academic performance.

Rooflight solution with VELUX Longlight 5-30° in open plan area at School , Campus Bütze Wolfurt, Wolfurt, Austria

While stimulation, colour and visual complexity are important to creating a vibrant learning environment in classrooms, what is the healthy balance between under-stimulation and over-stimulation?